Jeep Rear Tire Carrier Swing Down Boulder Series 76-86 Jeep CJ-7 Steel Bare Kit GenRight

This is the Steel version of the GenRight Swing Down Rear tire carrier for the Jeep CJ-7. We have used this style tire carrier on many of the GenRight Jeeps for years. We call it the Boulder Series Tire Carrier. We improved on an old design by adding additional tubes in key areas of the carrier cage to stiffen it. Then, we designed a New innovative mounting system to securely hold almost any tire and wheel combination from 33 inches to 42 inches! In line with our other high quality products that allow you to keep your Rear seat (or Rear cargo area), this tube style tire carrier is made with Heavy Duty 1.5 inch diameter x .120 inch wall steel tubing. The result is a cutting edge tire carrier fits tight to the Rear of the vehicle (only sticks back 15.5 inches off the tailgate) for the best possible departure angle. This is also a great rattle free way to hold a 33 inch to 42 inch spare tire that Will Not rip apart the back of your Jeep! Combine that with easy access by one person to change up to a 42 inch tire and you have a perfect choice for a trail rig with Big tires.
This Rear Carrier Includes:

• 1/4 inch thick internal gussets that tie the upper carrier to the Rear cage mounts (specific to each model Jeep)
• (2) Lower pivot mounting brackets that can be welded to any bumper (no welding required if you purchase the optional Rear cross member mounting plate) or get our high clearance bumper plate
• A beefy T-Handle with a heavy duty Acme thread to hold the tire/wheel into the carrier cage for long term durability
• A fish wire is pre-run through the carrier frame for a license plate and 3rd brake light
• Greasable urethane bushings isolate each of the 4 mounting points to eliminate rattles
• All necessary Grade 8 mounting hardware
• All the mounting brackets provided work from 0 inches up to 1.5 inches of adjustment to accommodate body lifts
• Unpainted Finish
• Sold As A Kit

Other Features:

• Fits Jeep CJ-7
• The carrier cage is 100 percent MIG welded in a jig
• Design makes it possible for one person to load and unload huge tires by themselves
• Easily fits up to 42 inch diameter x 14.5 inches wide tires
• Super light weight, entire assembly only weighs 55lbs (including bumper plate)
• Improves the vehicles departure angle
• Unique design fits any bolt pattern and any offset wheel
• Relocates the Rear license plate to the center
• Upper mounts are adjustable so you can make the pins easy to Remove after everything settles
• Upper pins are self locking so they Will Not fall out
• Works with factory hard or soft tops
• Notes:
• A heavy duty Rear Cross Member plate with tow points And two lower pivot mounts pre-welded is sold separately (please add at check out as an option). It is intended to replace your Rear bumper and improve your departure angle
• (4) Lightening holes in mounting plate make an excellent spot to mount our New LED back up lights (LED1500) or the New (LED1001S)
• Sold Unpainted and requires some finish work Before painting
• This product should be Fully installed Before painting and then Removed for paint or powdercoating
• When lowered, the tire/wheel assembly in the carrier cage, can be walked on as a ramp up to reach gear in the back of your Jeep
• Rubber bumper shown on top of carrier frame in pictures is transferred from the Jeep tailgate door
• A matching front bumper / stinger is also available (FBB-2010 and FBB2100)
• An Aluminum version of this tire carrier is also available (RTC3X40)